Description
The BPA60 from Bogen is a solid-state, 60W power amplifier that has been designed for professional and commercial sound systems. It can be driven from an amplifier that provides a 25- or 70-volt output and is thermally protected to prevent damage due to excessive temperatures.
Additional protection for the amp is provided by transient protection diodes and an electrical circuit breaker. The illuminated on/off power switch is located on the front panel. An input level control, circuit breaker reset, low-cut filter switch, and auxiliary receptacle are located on the rear panel.
Selectable outputs modes of 8-ohm/25V, 16-ohms, 25V CT, and 70VThe BPA60 can operate at full output even with ambient temperatures up to 130°F
| Number of Channels | 1 |
| Power Rating | 60 W |
| Load Impedance / Voltage | 8 / 16 Ohms 25 VCT 25 / 70 V |
| Protections | Circuit Breaker, Thermal |
| Frequency Response | 20 Hz to 20 kHz -2 dB |
| Input Sensitivity | Hi-Z: 300 mV |
| Input Impedance | Hi-Z: 50 Kilohms (Unbalanced) Low-Z: 600 Ohms (Balanced/Unbalanced) |
| SNR | 85 dB |
| THD | <2% (Full Range) |
Reviews
There are no reviews yet.