Description
EV4K2006 Includes Only:
- EV4K2006 (TX & RX)
- (2) IR Blasters (TX)
- (2) IR Receivers (RX)
- (1) DC 12V in line power supply
- Product Manual
Features:
- Allows HDMI audio/video signals to be transmitted using a single Cat5e or Cat6 Cable
- Transmission Range: Extends 4K at 60Hz, 4:4:4 Chroma up to 164ft/50m and 4K at 30Hz, 4:4:4 Chroma and HDR up to 130ft/40m over a single Cat5e/6 cable
- Features Power over Ethernet (PoE) Technology which transmits power over Cat5e/Cat6, allowing the transmitter and receiver to be powered off of a single power supply
- Wideband Bi-directional IR system allowing for control of source or display (IR accessories included)
- Wideband IR signal from 20KHz to 60KHz
- Features Auto EDID and EQ Management for plug and play installation
- HDR10 Compatible
- Works with HDMI and HDCP compliant devices
- HDCP 2.2 compliant
- Slim and compact design
- Pure uncompressed 7.1ch digital audio
- Supports DTS-HD and Dolby TrueHD high bit rate audio
- Dimensions: 2.7″ (68.58mm) W x .7″ (17.78mm) H x 3.25″ (82.55mm)
The Evolution by Vanco EV4K2006 HDMI Extender over Single Cat5e/6 with Bi-directional IR, auto EDID/EQ, and Bi-directional PoE extends 4K ultra high definition video with HDR and audio signals, IR, and power. Extends 4K at 60Hz, 4:4:4 Chroma Subsampling and HDR up to 164ft/50m, and 4K at 30Hz, 4:4:4 Chroma Subsampling, and HDR up to 130ft/40m. Bidirectional Power over Ethernet (PoE) Technology transmits power over Cat5e/6, allowing either the Transmitter or Receiver to be powered without the use of a power supply. No EDID or EQ adjustments are necessary as the units automatically adjusts for compatibility and gain. This extender set also features a newly redesigned slim and compact chassis for easy and flexible installations. This product fully supports DTS-HD and Dolby TrueHD audio formats and is HDCP compliant. In addition, bi-directional IR pass-through allows for source or display control. For extending HDMI over a single Cat5e/6 with IR at a long distance, with Power over Ethernet, the EV4K2006 is a great plug and play solution!
The EV4K2006 includes two units: transmitting unit (EV4K2006-TX) and receiving unit (EV4K2006-RX). The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one cost effective Cat5e/6 cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. The EV4K2006 offers the most convenient solution for HDMI extension over a single Cat5e/6 with Power over Ethernet and is the perfect solution for any application.
Installation Note:
- Not recommended to be used with other HDMI distribution products such as splitters and matrix units. Evolution HDBaseT extenders are recommended for combining with HDMI distribution products
- Recommended to be used with a permanent source, or non-rotating source. For any rotating source such as a conference room type setup, it is recommended to use an HDBaseT extender
- HDMI UHD Deep Color mode on some LG displays may need to be deactivated to avoid video signal issues
- Input Signal Plus on some Samsung displays may need to be deactivated to avoid video signal issues
For more information, please see Data Sheet and User Manual
| HDMI Compliance | HDMI Deep Color 30/36/48 bit color depth, Full 3D |
| HDCP Compliance | Yes |
| Video Bandwidth | 594 MHz |
| Video Support | 480i/480p/720p/1080i/1080p/4Kx2K at 60 |
| Audio Support | Surround Sound (up to 7.1 ch) or stereo digital audio |
| Input TMDS Signal | 1.2 Volts (peak to peak) |
| Input DDC Signal | 5 Volts (peak to peak, TTL) |
| ESD protection | (1) Human body model +/- 6kV (air-gap discharge) & (contact discharge) (2) Core chipset – +/-8KV |
| PCB stack-up | 4 layer board (impedance control – differential 100, single 50 |
| IR pass-thru | Full-duplex bi-directional |
| Input | (TX) 1xHDMI; ( RX) 1xRJ45 + 2×3.5mm |
| Output | (TX) 1xRJ45 + 2×3.5mm; (RX) 1xHDMI |
| HDMI source control | Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders |
| HDMI connector | Type A 19 pin female |
| RJ-45 connector | WE/SS 8P8C |
| LED indicators | Video lock yellow, Power, green |
| 3.5mm connector | (TX and RX) IR Receiver/ IR blaster |
| Mechanical Specs | |
| Housing | Metal enclosure |
| Power supply | (1)12V 2A |
| Power consumption | 3.5 Watts TX, 2.5 Watts RX |
| Operation temperature | 0 ~ 45 °rees Celsius |
| Storage temperature | -20~85 °rees Celsius |
| Relative humidity | 20-90% RH (no condensation) |
Reviews
There are no reviews yet.