Description
Features:
- The High-Jet™ DM 3290 offers remote fogging, up to 35 feet from the chemical reservoir.
- Fog character, controlled by a valve on the power head, can be adjusted from a ULV (ultra low volume) dry fog (7-12 micron VMD) to a heavy wet mist (30+ micron size). High-Jet units are thus well suited to a wide range of applications, including odor control, pest control, sanitizing, moistening, dust control and humidification.
- The power head screws into a standard 2″ NPT drum opening. A solenoid valve keeps lines charged and prevents chemical loss due to siphoning. And like all Fogmaster units intended for heavy-duty use, it incorporates a motor saver brush to prevent commutator damage at the end of the brush’s life.
- The discharge height of the High-Jet is limited to its suction lift (about six feet above liquid height). For higher lifts, an auxiliary transfer pump or chemical feed pump is required.
Note: Drum not included.
| Motor |
|
| Motor Brushes | Motor brushes are a wear part and must be replaced when worn (estimated life – 600 operating hours). Product includes standard MotorSaver™ brushes to protect commutator as brushes reach end of life. |
| Blower | Balanced fan, 2 stage, 20,000 rpm (no load) |
| Fogging Nozzle |
|
| Particle Size | 7-30 micron VMD, adjustable |
| Liquid Flow Rate |
|
| Chemicals | Handles both oil- and water-based chemical solutions (Liquid viscosity and density affect particle size distribution) |
| Liquid Reservoir Capacity | Attaches to the standard bung opening of most 15-, 30- or 55-gallon chemical drums. The DM fogger includes the drum adapter as shown, but not the drum itself. |
| Materials of Construction |
|
| Regulatory Compliance | UL, CSA, CE, PSE |
| Dimensions | H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm] |
| Shipping Weight | 12 pounds (Power head) |
Reviews
There are no reviews yet.