Description
Vanco, EVEXFBRK1, Evolution HDMI® Extender over Fiber with KVM USB Pass-Through
EVEXFBRK1 Includes Only:
- EVEXFBR1 (TX & RX)
- (1) IR Transmitter
- (1) IR Receiver
- (2) DC 12V Power Supply
- (1) USB 2.0 Male A Male-to-Male Cable
- (1) Set of Mounting Hardware
- (2) Multi-mode SFP Modules
- Product Manual
Features:
- Transmits audio and video via HDMI as well as complete KVM (Keyboard, Video, Mouse) functionality via
- USB 2.0 ports over fiber optic cables
- Transmission range: 984ft/300m over duplex multi-mode fiber optic cables; 6.2mi/10km over duplex single mode fiber optic cables
- Supports 4K at 60Hz, 4:2:0 chroma sampling and HDR; 4K at 60Hz and 4:4:4 chroma sampling
- Supports HDR10 and Dolby Vision
- USB 2.0 pass-through
- Includes (2) USB ports on receiving end for keyboard/mouse connectivity
- Features bi-directional IR (20kHz to 60kHz) pass-through for source and/or display control
- RS-232 pass-through
- Supports HDCP2.2
- LC Multi-mode SFP modules included
- TAA Compliant
- Dimensions: 4.9″ W x 4.4″ H x 1.1″ D
The Evolution by Vanco EVEXFBRK1 HDMI Extender with KVM, bi-directional IR, and RS-232, extends 4K HDR video and audio signals up to 984ft/300M over multi-mode fiber optic cables, and 6.2mi/10km over single mode fiber optic cables and modules! USB 2.0 KVM allows for controlling a security NVR/DVR, computer, NAS system, or any other component that is controlled by USB with this extender. No need to run a separate line or extender just for KVM control! Bi-directional IR pass-through allows for source and/or display control. Also features RS-232 pass-through for additional control. For extending HDMI with 4K HDR resolution at an extreme distance, the EVEXFBRK1 is a great solution for any application. The EVEXFBRK1 includes two units: transmitting unit (EVEXFBRK1-TX) and receiving unit (EVEXFBRK1-RX). The transmitting unit is used to capture the HDMI input with control signals and carries the signals via fiber optic cables. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR signals. Both units require power.
For more information, please see Data Sheet and User Manual
| Technical Specs | |
| HDMI Compliance | HDMI 2.0a |
| HDCP Compliance | HDCP 2.2 |
| Video Bandwidth | Single-link 594MHz [18Gbps] |
| Video Support | HDR 4K at 60Hz (4:2:0 10-bit color) / 4K at 60Hz (4:4:4 8-bit color) |
| HDMI over UTP | Yes |
| Audio Support | Surround Sound (up to 7.1 ch) or stereo digital audio |
| Input TMDS Signal | 1.2 Volts (peak to peak) |
| nput DDC Signal | 5 Volts (peak to peak, TTL) |
| ESD protection | Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge] |
| PCB stack-up | 4-layer board [impedance control — differential 100Ω; single 50Ω] |
| IR pass-thru | Bi-directional |
| RS-232 Support | Yes |
| HDMI source control | Controllable via IR pass-through from RX to TX and from TX to RX with IR extenders |
| HDMI connector | Type A 19 pin female |
| 3.5mm connector | IR receiver / IR blaster |
| Operation temperature | 0~40°C [32~104°F] |
| Storage temperature | -20~60°C [-4~140°F] |
| Relative humidity | 20-90% RH (no condensation) |
| Power Supply | 12V, 2A |
| Power Consumption | Max 10W |
Reviews
There are no reviews yet.